| Parameter
|
Standard
|
Special**
|
| Resistivity Range |
10 ohm - megohm |
1 ohm - 1 Gigohm |
| Tolerance |
|
|
Untrimmed |
+20% |
+10% |
Trimmed |
+1% |
+0.25% |
| TCR - Absolute |
+100 ppm/C |
+50 ppm/C |
| TCR - Tracking |
+50 ppm/C |
+25 ppm/C |
| Resistance Ratio |
+1% |
+.5% |
| Power Dissipation |
50 watts/sq. in. |
200 watts/sq. in. |
It is cost effective to
use standard resistor characteristics wherever possible.
Resistors can be printed on both sides of a substrate.
Printed on top of multilayer dielectrics.
Trimmed to any value using computer-controlled laser trimming systems.
Resistors can also be ratio-trimmed.
*Temperature Range: -55C to + 125C
** Technically feasible within the specific guidelines of the material
used. |
